Lawrence Livermore National Laboratory



2017

Wayne King will give an invited presentation at Additive Manufacturing of Metals: Establishing Location Specific, Processing-Microstructure-Property-Relationships to be held at TMS 2017 in San Diego, CA, February 26 through March 2, 2017.

Ibo Matthews will give an invited presentation at Additive Manufacturing: Building the Pathway towards Process and Material Qualification to be held at TMS 2017 in San Diego, CA, February 26 through March 2, 2017

2016

February 15, 2016, Wayne King gave present an inited talk at the TMS annual meeting on in Nashville, TN.

February 29, 2016, Wayne King gave an invited presentation at the the second annual AM for defense and government conference – 'Deloitte fed3D Forum' in Rosslyn, VA.

April 20-22, 2016, Wayne King gave an invited presentation at the second annual research symposium of the Center for Additive Manufacturing and Logistics (CAMAL) at North Caroline State University in Raleigh.

June 23-24, 2016, Wayne King will give an invited presentation at the International Forum on Additive Manufacturing at RMIT University in Melbourne, Australia.

Ibo Matthews will give an invited talk at the Workshop Opportunities for In-Situ Characterization During Advanced Manufacture to be held at the Advanced Photon Source at Argonne National Laboratory outside of Chicago, IL, USA on August 29-30th, 2016

Wayne King will give an invited talk at the Colorado School of Mines on November 8th, 2016

2015

February 15, Wayne King presented an inited talk at the TMS annual meeting in Nashville, TN.

Wayne King will give an invited presentation at the the second annual AM for defense and government conference – 'Deloitte fed3D Forum' on February 29th in Rosslyn, VA.

Wayne King will give an invited presentation at the second annual research symposium of the Center for Additive Manufacturing and Logistics (CAMAL) at North Caroline State University that will take place in Raleigh on April 20-22, 2016.

April 20, 2015, Amanda Wu gave an invited presentation entitled "Microstructural & Residual Stress Behavior in AM Metals" at the 2015 Additive Manufacturing Users Group, Jacksonville, FL.

May 17–20, 2015, Wayne King presented at Additive Manufacturing with Powder Metallurgy 2015, in San Diego.

May 10-15, 2015, Sheldon Wu gave a paper entitled Direct Calorimetric Measurement of Powder Absorptivity at CLEO: 2015 in San Jose, CA.

May 18-21, 2015, Chandrika Kamath made an invited presentation at the International Symposium on Big Data and Predictive Computational Modeling, Garching, Germany

July 7-9, 2015, Wayne King made an invited presentation at Additive Manufacturing and 3D Printing International Conference, Nottingham, UK

July 16, 2015, King was invited to speak at SEMICON West, in San Francisco on issues of improving process control and repeatability in additive manufacture at a program on disruptive technologies for the factory of the future at Moscone Center.

On August 2-5, Wayne King spoke at the ASME's Additive Manufacturing + 3D Printing (AM3D) conference in Boston.

September 23 and 24, 2015 Ibo Matthews gave an invited talk on laser materials processing at the Pacific Coast Machine Tool Conference at the Santa Clara Convention Center.

On October 7-9. 2015 Wayne King, Saad Khairallah, and Neil Hodge will participate in a panel at the workshop on Predictive Theoretical and Computational Approaches for Additive Manufacturing: A Workshop of the U.S. National Committee for Theoretical and Applied Mechanics at the US National Academies.

October 12-16, 2014 Bob Ferencz presented an invited talk at MS&T 2014 Materials Science of Additive Manufacturing: Modeling and Simulation II, in Pittsburgh, PA

On November 15-18, 2015, Wayne King will present an invited talk at the 1st TMS Summit on Integrated Manufacturing & Materials Innovations in Pittsburgh, Pennsylvania.

On December 8-9 2015 Wayne King will give an invited presentation at "Additive Manufacturing for Defense and Government" at the Washington, DC Holiday Inn Rosslyn at Key Bridge.

2014

February 5-6, 2014 Chandrika Kamath presented an invited talk at Informatics in Materials Design and Discovery conference in Santa Fe, NM

February 16-20, 2014 Amanda Wu presented a talk at The 143rd Annual Meeting & Exposition of TMS in San Diego, CA

February 25-27, 2014 Wayne King presented an invited talk at AeroDef® Manufacturing 2014, in Long Beach, CA

April 14-16, 2014, Wayne King gave a plenary talk at the 2014 ASPE Spring Topical Meeting on Dimensional Accuracy and Surface Finish in Additive Manufacturing in Berkeley, CA

April 15-16, 2014 Wayne King presented an invited talk at ASPE 2014 Spring Topical Meeting - Dimensional Accuracy and Surface Finish in Additive Manufacturing, in Berkeley, CA

May 6-7,2014, Wayne King presented an invited talk at the Design for Additive Summit in Atlanta, GA

May 18-20, 2014, Wayne King presented an invited talk at the inaugural Additive Manufacturing (AM) with Powder Metallurgy (PM) conference co-located with the PM2014 World Congress on Powder Metallurgy & Particulate Materials in Orlando.

May 18-21, 2014 Wayne King presented an invited talk at Additive Manufacturing with Powder Metallurgy, in Orlando, FL

June 10-12, 2014, Wayne King presented, "Simulation and Modeling of the Metal Laser Powder Bed Fusion Process to Accelerate Certification" at RAPID 2014 at the Cobo Center, Detroit, Michigan.

August 4-6, 2014 Ibo Matthews will present a talk at The 25th SFF Symposium - Silver Anniversary Meeting, in Austin, TX

August 4-6, 2014 Saad Khairallah will present a talk at The 25th SFF Symposium - Silver Anniversary Meeting, in Austin, TX

August 4-6, 2014 Alexander Rubenchik will present a talk at The 25th SFF Symposium - Silver Anniversary Meeting, in Austin, TX

October 12-16, 2014 Amanda Wu will present an invited talk at MS&T 2014 Materials Science of Additive Manufacturing: Materials Characterization II, in Pittsburgh, PA

October 12-16, 2014 Bob Ferencz will present an invited talk at MS&T 2014 Materials Science of Additive Manufacturing: Modeling and Simulation II, in Pittsburgh, PA

October 21-23, 2014 Wayne King will present an invited talk at Inside 3D Printing in Santa Clara, CA

October 16, 2014, King will present an invited seminar at the Pittsburgh Supercomputing Center in Pittsburgh, PA.

October 23, 2014 King will present an invited talk at Inside 3D Printing-Santa Clara, Santa Clara, CA

December 8th-10th 2014 Wayne King will present an invited talk at Additive Manufacturing in Government in Washington, DC

2013

July 12, 2013 Neil Hodge presented "Towards a Part-Level Finite Element Simulation of Selective Laser Melting (SLM)" at the 12th U.S. National Congress on Computational Mechanics in Rayleigh, NC.

August 13, 2013 Wayne King presented "Observation of "Keyhole Mode" Laser Melting in Laser Powder Bed Fusion Additive Manufacturing" at the Twenty Fourth Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, August 12-14, 2013, Austin, Texas

December 11, 2013 Wayne King will speak at the summit on Additive Manufacturing for Government, in Washington D.C

2012

October 1, 2012 ACAMM Launch